PROGRAMADOR ORIGINAL Xhorse VVDI PROG V4.9.2

Programador original Xhorse VVDI PROG V4.9.2

Reino Unido / EE. UU. / RU Almacén Envío rápido SIN IMPUESTOS

Idioma del programa VVDI: inglés, francés, italiano, español, árabe, cezch, polaco, portugués, ruso, turco y chino.

Última versión de software: V4.9.2

TOP 6 razones para obtener Xhorse VVDI PROG:

1. Software de actualización incorporado: haga que la actualización del firmware de VVDIProg sea oportuna.
2. Interfaz de comunicación USB de alta velocidad: haga que el software se conecte automáticamente.
3. Modo de operación inteligente: se enumerarán las posibles causas de error
4. Puertos de reserva: para futuras actualizaciones.
5. Función de autocomprobación: compruebe si la máquina funciona bien o no.
6. Fuente de alimentación: a través del cable USB, el software avisará automáticamente si se necesita una fuente de alimentación USB externa
7.Agregue recientemente las funciones del adaptador BMW Bosch, admite la lectura de ISN de BMW ECU N20 N55 N38, pero necesita comprar el adaptador VVDI Prog Bosch ECU.

Introducción al programador VVDI Prog:

● Características principales del programa VVDI
● Cables y funciones del programa VVDI
● Lista de chips compatibles con el programa VVDI
● Actualización de software más reciente de VVDI Prog
● Lista de paquetes de programa VVDI

Compre el programador VVDI Prog, obtenga la función de lectura BMW ISN gratuita y el chip NEC, MPC, Infineon, etc., actualiza continuamente el servicio

¿Dónde encontrar el enlace de descarga de software?

Estos adaptadores para el programa vvdi, si lo desea, puede pedir

Adaptador Xhorse VVDI Prog M35080
Adaptador Xhorse VVDI Prog EWS3
Adaptador de clip EEPROM Xhorse VVDI Prog

Caracteristica principal:

1. El software de actualización incorporado permite al usuario actualizar el firmware de VVDIProg a tiempo.
2. La interfaz de comunicación USB de alta velocidad permite que el software se conecte automáticamente.
3. Modo de operación inteligente: se enumerarán las posibles causas de error
4. Puertos de reserva: para futuras actualizaciones.
5. La función de autocomprobación le permite verificar si la máquina funciona bien.
6. Puede suministrar energía a través del cable USB, el software preguntará automáticamente si se necesita una fuente de alimentación USB externa.

Cables y funciones del programa VVDI:
Zócalo de bloqueo de 16 pines
Lea la EEPROOM común, nota: inserte el chip siguiendo la siguiente imagen.

1.3.2 Cable de reflujo MCU
Se usa para programar MCU a bordo

1.3.3 ECU Reflash Cable

Used to program ECU

VVDI Prog Supported chip list
EEPROM

Note: R means the type is supported, £ means the type will be supported soon in the future

MCU

Nota: R significa que el tipo es compatible £ significa que el tipo será compatible pronto en el futuro.

ECU

Nota: R significa que el tipo es compatible £ significa que el tipo será compatible pronto en el futuro.

VVDI PROG CHIP LIST

VVDI Prog Update:

VVDI PROG latest software version V4.9.2 update
————————————-
v4.9.2            (2020-03-16)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MUNUAL 4.9.2
version in Doc folder
+ Add STM32F405RG,
STM32F405OG,
STM32F405VG,
STM32F405ZG,
STM32F405OE,
STM32F407VE,
STM32F407ZE,
STM32F407IE,
STM32F407IG options in
<2-MCU>->
+ Add FRM-E-SERIES-XEQ384-READ,
FRM-E-SERIES-XEQ384-WRITE,
FRM-F-SERIES-XEP100-READ,
FRM-F-SERIES-XEP100-WRITE,
FRM-F-SERIES-XET512-READ,
FRM-F-SERIES-XET512-WRITE options
in <8-OTHERS->
+ Add ENVISION—TAILGATE-COMPUTER
options in<8-OTHERS->
+ Add PHAETON—TAILGATE-COMPUTER(2012)
options in<8-OTHERS->

VVDI Prog Latest Software V4.9.1 update: (2020-02-19)

* This version DON’t need update firmware
+ Add VVDI PROG USER MUNUAL 4.9.1version in Doc folder
+ Add ME17.3.0(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.10(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP54(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C69(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.31(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

+ Add MED17.7.5(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

+ Add MED17.7.7(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.5(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME 17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP49(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C76(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.12(ADAPTER) options in  <10-BOSH-ECU-ADAPTER>->

+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP52(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME1717.9.20(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C70(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C83(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.9(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.32(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add EDC17C79(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.4(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.8.3.3(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add MED17.1.27(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.24(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->
+ Add ME17.5.26(ADAPTER) options in <10-BOSH-ECU-ADAPTER>->

VVDI  PROG latest software version V4.9.0 update
————————————-
v4.9.0             (2020-01-15)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MUNUAL 4.9.0
version in Doc folder
+ Add R5F100_Data_8KB_Read_SECURED
options in
<2-MCU>->
+ Add R5F10C/D_Data_8KB_Read_SECURED
options in
<2-MCU>->
+ Add R5F104_Data_8KB_Read_SECURED
options in
<2-MCU>->
+ Add AXELA options
in<4-IMMOBILIZER>->
+ Add LINGZHI-V5(2016) options
in<5-DASHBOARD>->
+ Add TRUMPCHI-GS8(2017) options
in<5-DASHBOARD>->
+ Add TIGUAN-L options
in<7-AIRBAG>->
+ Add G63-FAS(2019)
options in<8-OTHER>->
+ Add G63-FAS-SWITCH(2019)
options in<8-OTHER>->
+ Add MED17.7.1(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.7.3(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C66(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C10(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.0.7(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP47(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP62(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C57(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C58(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.3(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP55(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.9(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C60(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP42(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.4.4(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.63(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C64(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

VVDI PROG latest software version V4.8.9 update
————————————-
v4.8.9              (2019-12-21)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MUNUAL 4.8.9
version in Doc folder
+ Add HYOSOW-S7 in
<4-IMMOBILIZER>->
+ Add 820 in
<4-IMMOBILIZER>->
+ Add S5 options
in<5-DASHBOARD>->
+ Add CROSS options
in<7-AIRBAG>->
+ Add AUDI-Q5-AMP options
in<8-OTHER>->
+ Add 205-LAMP-RH options
in<8-OTHER>->
+ Add 330-CABRIOLET-MODULE options
in<8-OTHER>->
+ Add F18-FZD options
in<8-OTHER>->
+ Add MED17.7.2(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.2(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17.7.8(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP46(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C45(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C56(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17C50_Fxx(ADAPTER)options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.3.5(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.9.30(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP50(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MED17.8.3(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add MEVD17.4.4(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add ME17.1.6(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->

VVDI PROG latest software V4.8.8 update
————————————-
v4.8.8          (2019-11-12)
* This version DON’t need update
firmware
* Fix ME17.5.22(ADAPTER) READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.8
version in Doc folder
+ Add STM32F407VG,
STM32F407ZG options in
<2-MCU>->
+ Add CAS4-1L15Y-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-1L15Y-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add CAS4-5M48H-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-5M48H-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add CAS4-5M48H-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-5M48H-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add CAS4-5M48H-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-5M48H-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add CAS4-5M48H-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-5M48H-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add CAS4-5M48H-CERAMICS-NO-NEED-
REMOVE-COMPONENTS,
CAS4-5M48H-METAL-NO-NEED-REMOVE-
COMPONENTS PICTURE in
<4-IMMOBILIZER>->->

+ Add MED17.1.62(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP57(ADAPTER),
ME17.8.32(ADAPTER),
MED17.7.2(ADAPTER),
MED17.7.3.1(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21.1(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add  MED17.7.2(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.21.1(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add ME17.9.52(ADAPTER),
EDC17C54(ADAPTER),
EDC17C74(ADAPTER),
EDC17CP44(ADAPTER),
ME17.1.1(ADAPTER),
MED17.1.1(ADAPTER),
MED17.1.6(ADAPTER),
MED17.1.21(ADAPTER),
MED17.1.61(ADAPTER),
MED17.5.21(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
+ Add TOYOTA_ME17.9.52(ADAPTER)
options in
<10-BOSH-ECU-ADAPTER>->
+ Add EDC17CP48(ADAPTER),
EDC

VVDI PROG latest software V4.8.7 update
————————————-
v4.8.7              (2019-9-19)
* This version DON’t need update firmware
* Fix BOSH ECU ADAPTER READ BUGs
+ Add VVDI PROG USER MUNUAL 4.8.7
version in Doc folder
+ Add R7F701062, R7F701064 ,R7F701067
options in<2-MCU>->
+ Add SCENIC(2007) options in<4-IMMOBILIZER>->
+ Add E3 options   in<5-DASHBOARD>->
+ Add TIGGO5(2014) options in<5-DASHBOARD>->
+ Add 300(2005) options in<5-DASHBOARD>->
+ Add SOUTHEAST-DX3(2016) options in<5-DASHBOARD>->
+ Add FRM-SRS options in<8-OTHER>->

VVDI PROG latest software version 4.8.6 update
————————————-
v4.8.6              (2019-9-02)
* This version DON’t need update
firmware
+ Add VVDI PROG USER MUNUAL 4.8.6
version in Doc folder
+ Add ME17.5.22(TC1724)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Exx(N20)(ADAPTER),
MEVD17.2.4_Fxx(N20)(ADAPTER),
MEVD17.2.9_Fxx(N20)(ADAPTER),
MEVD17.2.9_Exx(N20)(ADAPTER),
MED17.5.25(TC1782)(ADAPTER),
MED17_5_22(TC1782)(ADAPTER),
MEVD17_2_3(B38)(ADAPTER),
MEVD17_2_K(B38)(ADAPTER),
MEVD17.2.5(ADAPTER),
MEVD17.2.8(ADAPTER),
MEVD17.2.H(ADAPTER),
MEVD17.2.P_Fxx(N20)(ADAPTER),
MEVD17.2_Fxx(N55)(ADAPTER),
MEVD17.2.G(N55)(ADAPTER),
MEVD17.2.6(N55)(ADAPTER)
options in
<10-BOSH-ECU-ADAPTER>->
(Need BOSH ECU ADAPTER)
+ Add ME17.5.22(ADAPTER),
MED17_5_25(ADAPTER) options in
<10-BOSH-ECU-ADAPTER>->
  (Need BOSH ECU ADAPTER)

 VVDI Prog Package List: